Great short documentary on the Wall of Death – Riding Vintage Indian Motorcycle 101 Scouts!
If you ever get a chance to see the performance, it’s amazing, with the sites, sounds, and smells of this thrilling display!
If you ever get a chance to see the performance, it’s amazing, with the sites, sounds, and smells of this thrilling display!
Crocker & Indian Shared a history – Let’s read about the revival….
After nearly twelve years of hassles and legal setbacks, a brand-new Crocker Big-Twin motorcycle has emerged from a hangar in SoCal. Learn more at Cycle World now.
After nearly twelve years of hassles, legal setbacks, a change of countries, and one nasty recession, a brand-new Crocker Big-Tank motorcycle has emerged from a hangar in SoCal. Michael Schacht is at no loss for words in describing the ordeal he’s overcome to reach the point of turning a key, kicking over the 80 cubic-inch V-Twin, and hearing an engine he literally built from scratch rumble into throaty life. His first complete Crocker sits unpainted, brazed joints bright and cast iron dull, spun metal fenders covered with a zillion tiny scratches, the big aluminum tanks resplendent in their own bare-metal shine.
Schacht was a staunch Indian man a dozen years ago, and still rides a 1929 ‘101’ Scout nearly every day. His restored Indians brought him to the attention of a branding company who owned the Indian name in Canada. His machines were used for promo work and he gradually became ‘involved’ with the company, which was mostly interested in T-shirt sales at that time. When talk began of making an Indian motorcycle by re-badging a Ural, Schacht ran away. The idea of resurrecting an important American motorcycle marque stuck with him though, and while looking over two Crockers at a friend’s restoration shop, the big light went on and his destiny was set. “The Crocker name is so pure, nobody had tried to make a new one, even though several people tried to claim the name. It took some work, but I was finally able to secure the name with the intention of starting production of Crockers.”
Few people have made an entire motorcycle from scratch. Schacht admits he knew little of making castings, metallurgy or even production machining before he embarked on his dream. “I was lucky, and hired some incredibly talented people. I moved my facilities from Canada to Southern California, so that the Crocker would be made 100% in the U.S.A. It was important to me that such a historic name was built, again, in the country it started from. This is an all-American deal.” Schacht also wasn’t an expert on Crockers, but enlisted the help of collectors who are, such as Chuck Vernon. “These guys are the keepers of the flame. They know everything about these machines and helped me tremendously to sort out exactly how the original Crocker was made.” While the new Crocker is as faithful to Al Crocker’s original machine as possible, a few of the materials have been upgraded. “Better steels are available now, stronger and lighter, and while the appearance is identical with a 1939 bike, what’s inside is better.”
The Crocker Motorcycle Company does not, Schacht insists, produce ‘replicas’ of the motorcycles last produced in 1942. “These are continuation machines, built by the legal owner of the Crocker motorcyclename.” The new engine is certainly more powerful than a standard 61-inch Crocker from the 30s, pumping out a whopping 85 horses from the 80-inch V-Twin to push the same 500 pound machine. “We’ve just finished it, and there are a few minor bugs to sort out, but basically, she’s the best sounding motorcycle I’ve ever heard, is really, really fast, and handles beautifully. That was one of my biggest surprises about the Crocker; this is a serious performance machine.”
Stay tuned to Cycle World for additional information about production plans for these machines and a potential modern “retro-bike” in the works.
High on the list of truths universally acknowledged must be the fact that the Indian Motorcycle, as a legend, a logo and a symbol ranks up there with the golden arches and the three-pointed star, with power and value beyond calculation. On the other hand, naming your daughter Baby Ruth doesn’t ensure she will hit 60 homers a season against big-league pitching. To collect on the promise of legend and esteem, you gotta have a product.
We are concerned here with the Indian, originally spelled Motocycle by the founders, as currently offered by Polaris Industries. To fully appreciate this, we’ll have to look back 60 years, to an undisputed tragedy.
At the close of WWII, a prosperous and product-starved public was ready to buy just about anything. The car and motorcycle makers had learned a lot during the war, but they were canny enough to offer the old versions while testing and refining the new. The 1947 Harley-Davidsons, Fords, Chevys, Dodges, etc., were identical to the 1941 models, while the improved models—the ohv Oldsmobile engine and the telescopic-fork Hydra-Glide—didn’t get here until 1949.
But at the Wigwam, as always, things were different. E. Paul DuPont, who owned Indian and kept the brand in business through the Great Depression, sold his shares in the company. The new owners had new ideas—vision, one could say. The firm’s chief engineer had designed a radical line of really new machines, modular in that there would be a Single, a Twin and a Four, all using the same basic design, all overhead valve, foot shift and hand clutch, suspension fore and aft, with the writing on the tank being the only clue as to what was what.
Further, the new president embarked on a revolutionary ad campaign. As the Japanese say, he reckoned to enlarge the pie, rather than fight over slices. The completely different motorcycles were launched in 1945, with a completely different campaign endorsed by baseball, show business and movie stars.
But wait: Doesn’t this sound like Honda in 1959, meeting the nicest people and all that? Yes. But for one thing, Honda’s dealer network was based on new people who mostly ran hardware or sporting-goods stores, and for another, Honda’s engineering raised the bar worldwide.
Indian’s new bikes—the Single and Twin (the inline-Four never got past the prototype stage)—were disasters. When they didn’t blow up, they broke down. The motorcycling community was small, and everybody knew how bad the new models were. Add to that, the old dealer network, the guys who’d raised a stink when the evergreen Scout was abandoned and stormed the boardroom demanding a new one, wasn’t always that happy with the new people.
Suffice it here to say that everything that could go wrong did. The money ran out and Indian’s new owners begged for help. The English brands were doing well, so Indian asked to distribute several makes. A partnership was formed, and before you could say the camel’s nose was in the tent, the Indian visionaries were out, the English owned Indian and production of the new models was immediately stopped. The final production run of the final genuine Indians, the Blackhawk version of the side-valve 80-inch Chief, came in 1953.
There followed a run of Royal Enfields and later, Matchlesses labeled Indian, but fooling nobody. Next, a puzzle and struggle over ownership of the script, name and symbols. There were Matchless-Indians, then a run of Italian Indians backed by entrepreneur Floyd Clymer, first road bikes and then motocross.
Next, a series of failures on a different stage: promoters with big plans and no money, who never made any motorcycles. A serious effort appeared in 1999. There was a major market at the time for full-dress Harleys and look-alike rivals from the major brands. Indian of America had a factory in Gilroy, California, and produced a viable machine, a big Twin styled like the old Chief and powered by a version of a Harley clone. But the funding wasn’t enough, sales did not meet hopes and the firm went bankrupt in 2003. Three years later, another group of investors picked up the baton and began building the same sort of repro-Indian Chief, this time with modern engineering as in EFI and a bigger V-Twin than Indian Motocycle ever dreamed of—all of it just in time for the bottom to drop out of the market.
But the true revival, one can only hope, came in 2011, when Polaris bought the struggling brand. What’s the difference this time? The lesson since the debacle in 1945 is clear: It’s a heap more difficult to produce a viable motorcycle than all those dreamers and promoters realized. They all had the script and the logo and the legend, but not one had a product to match the hype, good intentions or no.
In contrast, Triumph, with a logo and badge nearly as good, was revived and still thrives simply because it had 1) the capital to invest; and 2) a properly engineered machine that created its own market. It didn’t revise the classic Bonneville Twin until the big Triples proved that the product matched the promotion. Knock wood, those Indian dealers who stormed the boardroom demanding a new Scout in 1947, may soon get their wish. Except there is a very good chance it will be a Chief.
I don’t hear anybody complaining.
Motorcycle Restoration part of nostalgia trip
BOULDER (AP) — A growing band of once nearly extinct Indians is being resurrected in Boulder, some restored from rusting graveyards while others quietly survived the decades until their time had come again.
Not the red-blooded variety of hostiles these, but iron and steel Indian motorcycles built at the old Wigwam factory in Springfield, Mass., before the firm went bankrupt in 1953, leaving Harley Davidson as America’s lone motorcycle manufacturer.
“Save a piece of America — restore something,” is how machinist and tool-and-die maker Jeff Grigsby explains why he got into his growing business of restoring the old Indians to better-than-new condition.
Grigsby, born the year Indian went broke, says his customers are a “well-to-do crowd” since his inside-out restoration jobs run $7,000 to $9,000 on the Chiefs, the big 74-to-80 cubic inch V-twin Indians.
Back in the 1950s after Indian went broke, a dollar-short generation of young riders bought up those big, graceful but distressed Chiefs for $150 to $300. They hacksawed the full-skirted fenders into bobtails and destroyed them in street-drag duels with the quicker, lighter British bikes then flooding the market.
Only a few Indians survived.
Grigsby says there are more than 20 of the Indians running around the Boulder area now, ranging from well-worn to concourse condition. They include the rare Indian 4-cylinder machines, mostly the big V-twin Chiefs, and even a 1915 Power Plus twin.
One of those Indian riders is Eldon Arnold, 58, who bought his 1950 80-inch Chief 23 years ago and now has about 60,000 miles on it.
“You can’t wear them out. With a little extra care they’ll run forever. As the years went by, the Indian got more valuable and I hated to go out on the road with it. And at one time, parts were hard to come by. But they’re being duplicated again now,” Arnold said, summing up the nearly three decades since Indian went broke.
Ninety percent of American motorcycling today is done on Japanese bikes. Grigsby thinks increasing interest in the old Indian bikes is because they were American-made and represent a vibrant, classic era in motorcycling.
“It’s a study of history, of American engineering,” Grigsby said of the Indian bikes who battled Harley, Excelsior, Henderson, Pope and Cyclone for race track and sales supremacy during the golden age of American motorcycle production.
Indian began production in 1901, won the nation’s first motorcycle race (a 10-miler at Brooklyn, N.Y.) in 1902, then entered international Gran Prix racing and swept Britain’s Isle of Man 1-2-3 in 1911.
Every U.S. national motorcycle championship in 1928 and 1929 was won by an Indian.
“A Harley rider looked on an Indian rider like a racist thing. It was blood for blood back then and Indian still held all the speed records — and that determined the sales of a lot of motorcycles,” Grigsby said.
“The Indian is a rarer breed (than Harleys a desirable unit. People that rode these bikes when they were young now realize they can get one in better than new condition.
“I guess it’s a compensation to give up a gas-eatin’ hog for a piece of classic transportation that gets 60 to 65 miles to the gallon on regular,” Grigsby added.
At 27, Grigsby is an 11-year veteran of motorcycle mechanics. He dropped out of school at age 16 to attend a Harley Davidson factory mechanics school and then took a job at a Los Angeles Harley shop.
He took his four-year machinist’s apprenticeship in Boulder with Ed Gitlin at the shop where Grigsby still does his machining trade.Grigsby had balanced, tuned and blue-printed Harley V-twins for several years before “I fell into a large investment of close to 40 Indian motorcycles three years ago.”
Since then he has restored five of the Indians, with three more underway for completion in March. He hopes to expand to 12 at a time for the next batch. “Everybody that sees ‘em, wants ‘em.”
Partner in the effort is Jim Arnold, Eldon’s son, who restores the Indians’
instruments, speedometers, switches and does all detail work.
Grigsby says his Indians go through five stages of complete dismantling and reassembly. The final finish and fit is more like that of a hand-built Italian Ferrari than the original, production Springfield Indians.
Grigsby replaces plain bronze bushings with needle bearings wherever possible, Teflon-coats engine parts, mirror polishes combustion chambers and improves on the original lubrication system.
If the Indian was such a classic, why did the firm go belly up?
Cycling historians say loss of World War II government contracts when the military opted for the Jeep instead of courier motorcycles and a fatally flawed new British-style engine marketed after the war — it consistently blew main bearings — led to Indian’s defeat.
Now, 27 years later, restorers like Grigsby and Arnold at shops scattered across the country are bringing the last remnants of the old Indian line back to showroom condition as America’s nostalgia kick moves into the motorcycling arena.
And after so many moons, the end of the trail for Indian has become a new beginning.
Editors Note:This reprint is from 1980. Jeff is still active with building musem quality Indian Motorcycles. He is one of many rebuilders who have kept the brand alive!
The recent resurrection of Indian Motorcycle by Polaris conjures memories of the originals and engenders comparisons of the classics to the new generation.
Mike Wolfe is known as an American picker. He’s a TV star, author and entrepreneur.
But mostly, he’d tell you, he’s an Indian Motorcycle® enthusiast. He loves them for their history and heritage, and for their ride. His “best pick – ever” (and what got him in the business full-time) was when he scored a treasure trove of Indian® motorcycles at a Pennsylvania farm.
Mike called the farmer about his classified ad, then drove 800 miles and slept in his van in the farmer’s driveway. The next day, the farmer opened two barns, revealing 10 vintage Indian® motorcycles and tons of parts. Mike Wolfe discovered heaven on earth.
In his picking business, Mike encounters antiques of every kind. But his greatest picking passion is Indian® motorcycles. He collects them. Gets them running. And mostly, he rides. He loves dings, dents, scratches and rust. Forget cosmetics or fresh paint. Just ride. After all, it’s an Indian®.
Indian Motorcycle is excited to be working and riding with Mike Wolfe. He’s helping us bring back the passion this iconic brand deserves, and is energized to ride with us into the exciting next chapter of Indian Motorcycle® history.
In 1901, bicycle racer and builder George Hendee teamed up with engineer Carl Oscar Hedstrom to build a 1.75 hp single cylinder motorcycle prototype with a revolutionary chain drive. This motorized bicycle met with immediate success, and the 1933 Indian Motorcycle. Indian Motocycle Company was soon formed in Springfield, Massachusetts.
One of the oldest of the antique motorcycles that sat arrayed on Spanish Street on Tuesday afternoon was a 1916 Harley-Davidson, just a shade lighter than robin’s egg blue with a wide leather seat and broad, rounded handlebars.
Navy, red and gold pinstriping curled finely across the bicycle-looking frame, and the long, boxy gas tank bore the moniker “The Frankfurter.” Across the street, lounging in the shade on a bench outside the Brick Street Gallery antique store was the bike’s owner, Thomas Trapp.
He was one of more than 100 vintage-motorcycle enthusiasts rolling across the country in the motorcycle Cannonball Endurance Run. They started in Daytona, Florida, on Friday and made a pit stop in Cape Girardeau on their way to Tacoma, Washington.
Trapp runs a Harley Davidson dealership in Frankfurt, Germany, and says the run is the apex event for old-school gearheads such as himself. As he talked about the run, his blue eyes turned bright with the type of devotion to craft, bikes and lifestyle that motorcyclists are known for.
“Let me tell you,” he said in a round German accent, “I am riding vintage bikes for 40 years. I’m racing vintage for a long time. When you are into vintage stuff, I am always searching for the new thing, a new challenge.”A 1916 Harley Davidson F owned by Thomas Trapp of Germany is displayed for the Motorcycle Cannonball Endurance Run on Tuesday in Cape Girardeau.
He explained Erwin “Cannon Ball” Baker’s legacy is one of the most potent allures of the run. Baker set more than 140 driving records in his day, and his reputation for marathon rides is what inspired the event.
“He made it [across the country] in 12 days,” Trapp said, “in 1914 on an Indian [motorcycle].”
The motorcycles turn heads, to be sure, but some followers had traveled a distance to see the classic machines. Dave Sickmeyer has been following the competition online since it left Daytona. He and his wife Cindy came from Steelville, Illinois, to see them. He said the engineering of the Hendersons are his favorite part.
“How long have I been riding? Oh boy,” he said.
“His whole life,” Cindy assured.Ron Roberts of New Hampshire rides his 1936 Indian Chief across the Bill Emerson Memorial Bridge for the Motorcycle Cannonball Endurance Run on Tuesday in Cape Girardeau.
“Yeah, I’m 63; I’ve been riding since I was 12,” he said. He shifted his weight to ponder the midnight blue four-cylinder Henderson in front of him.
“Boy, I’d like to be able to buy an old bike like this, but you’re talking around 50 grand right off the bat.”
“What intrigues me is that they come from all over the world,” said Cindy. She said she was impressed by the German bike and at how old some of them were.
At 98 years old, Trapp’s bike isn’t much different from Baker’s original Indian, and the similarities don’t stop at the antique V-twin engine. The rules of the run allow for modification in the name of safety, Trapp explained, pointing at another driver rolling off his Henderson four-cylinder to fix a flat.
“See? He’s changed the wheelbase to get modern tires and a front brake from a BMW,” he said. “Which is totally fine for safety.”
But as he detailed his ride’s specs, a smile cracked across his sunburned face. He hadn’t installed a front brake. He hadn’t altered his wheelbase. What he’d done is position himself to compete in the run as a purist.
“There is nothing more in the world than the Cannonball on a Harley Davidson,” he said. “We are just about five or six people whose bikes are 1915 to 1919.”
When he brushed back his weather-beaten white-blonde hair, the inside of his right forearm bore an intricately inked rendering of a motorcycle: a 1916 Harley Davidson with a V-twin engine and a long, boxy gas tank.
“Yes, it’s the same one,” he nodded, beaming with pride.